HHT-200 8" Adjustable Hole Cutter

Twin Blade Replaceable
Description
$64.95
  • Intended for use only in Stationary Drill Press
  • Includes both High Speed Steel and Tungsten Carbide blades, combining HH-200 for wood and HT-200 for metal cutting
  • Replaceable cutter blades and pilot drill. Economical, replace the blades or drill, not the complete hole cutter.
  • Precision sharpened cutter blades for smooth, accurate cuts.
  • To extend the cutting depth to 2” (50 mm), stop boring when the pilot drill extends through the work piece. Then, using the drill bit as a guide, start cutting the hole from the opposite side.
  • Easily adjusts to cut the exact size hole needed
  • Measurements are shown in inches and millimeters.
Use for cutting

wood & MDF, brass

plastics, aluminum, hardi board, fiberglass

 Hexagonal wrench for adjusting the cutting size Tungsten carbide steel (BT-002) and High speed steel (BH-002)

User replaceable
Specification
Cutting Diameter
1 9/16" (40 mm) - 7 7/8" (200 mm)
Cutting Thickness
1/8" - 1" (25mm) -- 2" when can be cut from both sides.
Drill Shank
3/8" (10 mm)
Blade Material
Tungsten carbide steel or High speed steel
Cutting Materials
Fiber cement board, Hard materials, etc.