HH-200 8" Adjustable Hole Cutter

Twin Blade Replaceable
Description
$39.95
  • Intended for use only in Stationary Drill Press
  • Replaceable cutter blades and pilot drill. Economical, replace the blades or drill, not the complete hole cutter.
  • Precision sharpened cutter blades for smooth, accurate cuts.
  • To extend the cutting depth to 2” (50 mm), stop boring when the pilot drill extends through the work piece. Then, using the drill bit as a guide, start cutting the hole from the opposite side.
  • Easily adjusts to cut the exact size hole needed
  • Scale shows diameter of hole – for 3” hole set each blade holder at the 3" mark on the bar.
  • Measurements are shown in inches and millimeters.
Use for cutting wood & MDF, plastics Hexagonal wrench for adjusting the cutting size High speed steel blades

User replaceable
Specification
Cutting Diameter
1 9/16" (40 mm) - 8" (200 mm)
Cutting Thickness
1/8" - 1" (25mm) -- 2" when can be cut from both sides.
Drill Shank
3/8" (10 mm)
Blade Material
High speed steel
Cutting Materials
Plywood, veneer, woodboard. plasterboard, acrylic sheet. Thin asbestos slate, etc.