What comes with the different Hole Pro hole cutter kits?

[hpadmin]

What comes with the different hole cutter kits?

[hpadmin]

The different models are described below. All models use a 3/8" shank in the drill.

The Power X Series offer the twin blade models, the X-200 (1 5/8" to 8"), the X-305 (1 7/8" to 12"), the X-425 (1 7/8 " to 17")

These 3 hole cutter kits all come with

1 - Safety patented tri-slot ABS shield

2 - Plastic carry case

3 - 2 allen wrenches, 1 to adjust the size hole and the other to change blades

4 - 1 set of tungsten carbide blades (installed in the cutter)

5 - 1 set of high speed steel blades (extra in the carry case)

6 - Can be used in a drill press without the safety shield



The Power CL Series offer the single blade models, the CL220 (1 1/8" to 8 5/8"), the CL285 (1 3/8" to 11 3/8")

These 2 hole cutter kits all come with

1 - Safety patented tri-slot ABS shield

2 - Plastic carry case

3 - 1 allen wrench to change blades

4 - 1 tungsten carbide blade (installed in the cutter)

5 - 1 high speed steel blade (extra in the carry case)

6 - Measure bars

7 - Can be used in a drill press without the safety shield


The four Drill Press models are described below

The HH200 cuts holes from 1 5/8" to 8" and comes with:

1 - Plastic carry case

2 - 2 allen wrenches, 1 to adjust the size hole and the other to change blades

3 - 1 set of high speed steel blades (installed in the cutter)

4 - brad point pilot drill

The HH300 cuts holes from 1 5/8" to 12" and comes with:

1 - 2 allen wrenches, 1 to adjust the size hole and the other to change blades

2 - 1 set of high speed steel blades (installed in the cutter)

3 - brad point pilot drill

The HT200 cuts holes from 1 5/8" to 8" and comes with:

1 - Plastic carry case

2 - 2 allen wrenches, 1 to adjust the size hole and the other to change blades

3 - 1 set of tungsten carbide blades (installed in the cutter)

4 - high speed steel pilot drill

The HHT200 cuts holes from 1 5/8" to 8" and comes with:

1 - Plastic carry case

2 - 2 allen wrenches, 1 to adjust the size hole and the other to change blades

3 - 1 set of tungsten carbide blades (installed in the cutter)

4 - 1 set of high speed steel blades (extra in the carry case)

4 - brad point pilot drill